Lodar 12 function Soft Control valve block harness plugs straight into the Lodar PWM receiver to provide a waterproof connection into all 31 pins for the inputs, the12 PWM, Master and Safety Outputs, and a dedicated connector for the E-stop and Changeover switch to allow manual operation of the valve block.
The HDP26-31-SE-LO15 Deutsch connector, is fully populated with machine crimped terminals onto the yellow wires.
The 4 pin DT06-4S-CE05 Deutsch connector plug interfaces with the power supply, E-Stop and Changeover harness in compatible products below.
Each 1.0mm UK made wire is numbered between 1 and 31 for ease of use and protected inside a 20mm diameter flexible conduit, connected straight onto the Deutsch plug with a total length of 1m.
The Bare wire ends are partially stripped ready for direct connection.
We can customise this product to suit your installation or make plug and play.
