Lodar 6 function Soft Control valve block harness plugs straight into the Lodar PWM receiver to provide a waterproof connection into 19 pins for the inputs, the 6 PWM, Master and Safety Outputs, with the remaining pin outs containing sealing plugs.
The HDP26-31-SE-LO15 Deutsch connector, is fully populated with machine crimped terminals onto the yellow wires.
Each 1.0mm UK made wire is numbered between 1 and 31 for ease of use and protected inside a 20mm diameter flexible conduit, connected straight onto the Deutsch plug (not 90 deg as in picture) with a total length of 1m.
The Bare wire ends are partially stripped ready for direct connection.
We can customise this product to suit your installation or make plug and play.